|
|
|
|
|
| Products Care: |
|
|
Check all instructions for use and sterilisation of new instruments. Unless otherwise directed they should be inspected, cleaned, rinsed and lubricated before put into service.
Lubricate after cleaning with a propriety water-soluble instrument lubricant.
Ensure all instruments are only used for the purpose for which they were designed.
Handle all instruments gently. Never overstrain, drop or misuse them.
Dismantle, clean and decontaminate all instruments in cold water as soon as possible after use, giving particular attention to serration, joints and ratchets. Failure to do so may result in the instrument becoming stained with the possibility of stiff joints.
Give special attention to microsurgical instruments. Their fine tips can easily be damaged by contact with other instruments or the sides of the case in which they should be kept. Hand cleaning is preferable.
Ensure that the detergent is of the manufacturers recommended strength if ltrasonic or cleaning machines are used.
Ensure all instruments are thoroughly dried before being stored.
Pack instruments carefully with the heavier ones lying on a piece of cloth or towel at the bottom.
Store and sterilise bow-handled instruments on a special holder. Always leave racks and ratchets open.
Check the hardness of the water used in the autoclave. If the water Is too hard it will leave a deposit on the instruments.
If a water softener is used ensure it is at the manufacturers recommended level. Too much may cause discolouration or pitting. |
|
|
|
|
Diagnostics